For providing access via PPPoE it is required a PPPoE network access server (NAS) and a subscriber’s unit (PPPoE client).
In this guide as a PPPoE network access server it is used a freeware packet rp-pppoe.

Step1. First we need intenet access and 2 network cards (eth0 – WAN, eth1 – LAN).

vim /etc/network/interfaces

auto lo
iface lo inet loopback
iface eth0 inet static
address #Your public IP address
netmask  #Your subnet mask
gateway    #Your gateway

iface eth1 inet static

Step2. Install ppp daemon:

apt-get install ppp

Step3. Get rp-pppoe from here and install it.


Extract the archive:

Continue Reading…

Page 1 of 11