For providing access via PPPoE it is required a PPPoE network access server (NAS) and a subscriber’s unit (PPPoE client).
In this guide as a PPPoE network access server it is used a freeware packet rp-pppoe.

Step1. First we need intenet access and 2 network cards (eth0 – WAN, eth1 – LAN).

vim /etc/network/interfaces

auto lo
iface lo inet loopback
iface eth0 inet static
address 89.xxx.xxx.xxx #Your public IP address
netmask 255.xxx.xxx.xxx  #Your subnet mask
gateway 89.xxx.xxx.xxx    #Your gateway

iface eth1 inet static
address 192.168.4.254
netmask 255.255.255.0

Step2. Install ppp daemon:

apt-get install ppp

Step3. Get rp-pppoe from here and install it.

wget http://www.roaringpenguin.com/files/download/rp-pppoe-3.10.tar.gz

Extract the archive:

Continue Reading…

Page 1 of 11